Nokia Cable Finder Version-7 updated Nov-2010

1. All updated Models included.

2. Battery Finder Version-1 included

5130c RM 495, is a handphone nokia BB5 SL3 categories ...
and because it was so many people say the phones are not support for the process simlock unlock and repair ... and repairs ervice Contacts ....
Things true .........................???

Um .... before we parse the facts, there is an important question .... what SL3 or Security Level 3?
Should we understand from the beginning ..... SL1, SL2, SL3 ..........

A lot of information circulating on various forums and each one is slightly different,
but more or less following the division according to what I understand and believe:
SL1 (Security Level 1) = Nokia BB5 early generations who do not have areas of 120 PM
SL2 (Security Level 2) = Nokia BB5 that have PM120 areas and simlock area contains data that are connected with the value PM308
SL3 (Security Level 3) = Nokia BB5 that have areas of PM 120, PM308 and protected areas



Based on the distribution of the above, what can and what can not be performed on each of these types of mobile phone?
SL1
Flashing = can be done
Write PM 1 and PM = 309 can do (using the SX4, reset the NPC, Bypass CRT)
Write PM all of area = could do
Write RPL = Can be done
Unlock = can be done
SL2
Flashing = Can be done
Write PM 1 and PM309 = Can be done (using the SX4, reset the NPC, Bypass CRT)
Write PM all of area = Can be done
Write RPL = Can be done
Unlock = Can be done

SL3
Flashing = Can be done
Write PM PM309 = 1 and could be done (using the SX4, reset the NPC, Bypass CRT)
Write PM area 308 = Can not be done
Write RPL = Can be done
Unlock = not done

NB: the SX4 with the way the bypass Cert results are sometimes not perfect ... therefore recommend to use SX4 at Auth via the server.

Test security is related to the value of PM 1 and PM 309, if the value in both areas there is an invalid ... the results of selftest in the security test will be failed / failing. The result is "contact service".
Solution: re-write the area AM and PM 309 to the first valid value

Simlock test associated with the value of PM 120 and PM 308, if the value at the proficiency level in these two areas there that are not valid, then the results of selftest in Simlock test will be failed / failing. The result is "contact service".
Solution:
1. If the value of AM 120 with problems, if you have a valid backup, can be tried to write over these areas. If not, create your own PM 0 section 120 using a variety of free tools available, then try to re-write the area ...
2. If the PM 308 is problematic, it seems there is currently no tool that is able to fix it, because the PM 308 protected areas, can not re-write (some say could ... with a little trick)

I believe, that a small area of AM 308 could probably corrupt, because the area is protected ... so if you have a problem contact service for simlock test failed, then most likely due to a corrupt area of 120 PM, not AM 308 area.
Examples PM 120 log because of a corrupt ...

I think its possible....cause PM 308 cannot corrupt/modify......

Mobile SL3
Mobile Type SL3 are all types of HP BB5 SL2, whether using single or dual engine processor, using RAP3G or Rapido, if phone has PM120 area or / and have a protected area PM308 and also protection against firmware so that in general the various tools or software improvement on the market today can not do Rebuilt Simlock data and key data on handpone simlock this category.
Tipe2 Mobile Nokia SL3:
* RM-352 3600s? MCU SW 56.26
* 5310 RM-303? MCU SW 58.58, 59.42 MCU SW. Raps V3.01
* 6300 RM-217? MCU SW 57.20
* 6500C RM-265? MCU SW 59.45 RAP3GS V2.0
* RM-240 6500s? MCU SW 59.60 RAP3GS
* 5130c RM-495 ALL-PA RAPS_V3.03 version
According to information circulating among programmers and engineers that most tools or software on the market improvements have not been able to do against handphone2 UNLOCK process, because handphone2 PM308 has a protected area which can not be re-programmed (except for DM3? There may be a tool that others). Also Rebuild process Cert (ASK-RPL service) will not run perfectly or it can be said Not Supported? So if we have a case? Contact Service? simlock caused by a corrupt (in cell phones this type), do not rush to do ask2rpl service because there are no tools /software improvements that can improve all of the certificates are perfectly / properly 100% ..

Video Tutorials Contact'Service-5130c RM495 which often caused because security'failed

New Nokia Flasher Released - Fenix Key

New Nokia Flasher Released!
The Fenix Key

-it's cheap
-its's fast
-its's incredible cool


click the link below to see our youtube videos
http://www.youtube.com/user/gsm24forum


good news that Raskal was back with new product

hope that he will give good Support (not like JAF)

every one need Good product

good product is which has Good Support & Service

Cdma Pro MultiUnlocker 1.0.0.2
-Added Haier C300 HAC300MV02 TYPE2 Apr 25 2009 World First Again
-Added SAMSUNG SCH-209 Model
Please note this model was unlocking before also by selecting B119NEW but now more better to select model.

Cdma pro LG Unlocker 1.0.0.03
-Added RD3640 F04 1 click Unlock support World First Again
-bix fixed in unlocking few phones

Cdma Pro zte unlocker 1.0.0.02
-Added S100 hot new security 3B01 version 1 click support. World First Again

Bug fixes
scard detection bug make catastrophic error

Download
LINK


Its just the begining

Cdma Pro MultiUnlocker 1.0.0.2
-Added Haier C300 HAC300MV02 TYPE2 Apr 25 2009 World First Again
-Added SAMSUNG SCH-209 Model
Please note this model was unlocking before also by selecting B119NEW but now more better to select model.

Cdma pro LG Unlocker 1.0.0.03
-Added RD3640 F04 1 click Unlock support World First Again
-bix fixed in unlocking few phones

Cdma Pro zte unlocker 1.0.0.02
-Added S100 hot new security 3B01 version 1 click support. World First Again

Bug fixes
scard detection bug make catastrophic error

Download
LINK


Its just the begining

http://www.4shared.com/file/5G_aIZo3/nokia_mic_solution_bb5_by_mhd_.htm

ZTE C332 PING FILE http://rapidshare.com/files/15448753....0B09.rar.html

ZTE C335 TATA FILE http://rapidshare.com/files/15448826....1B01.rar.html

ZTE C336 TATA FILE http://rapidshare.com/files/15448895....1B04.rar.html

ZTE C330 UNLOCK CHINA BIN http://rapidshare.com/files/15449011....0B10.rar.html


ZTE FLASHER http://rapidshare.com/files/15449075...ASHER.rar.html

PINOUTS
keyboard top
1..........8
1: phone Tx (RJ-45 pin-3)
2: phone Rx (RJ-45 pin-2)
3: Gnd


NOW THE TRICK

JUST OPEN THE FLASHER AND CHECK THE COMPORT
NOW CONNET THE CABLE TO THE SET
IT WILL SHOW THE VERSION ON THE UPPER MIDDLE OF THE FLASHER
NOW SELECT THE APPORIPIATE FLASH FILE IN PHONE IMAGE FILE AND CHECK ESN OR MEID AND CLICK THE START BUTTON
NOW URE SET WILL BE IN OFFLINE MODE AND THE FLASHER WILL START READING NV ITEMS
NOW JUST WHEN IT IS READING THE NV ITEMS REPLACE THE ORIGINAL PHONE IMAGE FILE WITH CHINA UNICOM 330 UNLOCKING FILE AND DON'T CLICK ANY OTHER THING OR PLUG OUT THE CABLE OTHERWISE U BE HAVING A DEAD ZTE IN URE HAND

NOW WHEN ALL THE FLASHING IS COMPLETED THE FLASHER WILLL RESTORE READED NV ITEMS
ALL THE WHOLE PROCESS WILL TAKE ABOUT 7 TO 10 MIN SO BE PATIENCE

NOW URE SET WILL RESTART AND IT WILL BE UNLOCKED TO RUN ALL UIM CARDS

JUST TO REMIND THAT THE LOGO WILL BE CHANGED AND URE WARRANTY WILL BE LOST

Cdma Unlock Code for C5000,C6000,C3010 without RIM

*32#00# or *32#99#

Then, You will see options

1. Turn on
2. Turn off

.:: NOKIA ::.Universal Codes
Code Description :
These Nokia codes will work on most Nokia Mobile Phones
(1) *3370# Activate Enhanced Full Rate Codec (EFR) - Your phone uses the best sound quality but talk time is reduced by approx. 5%
(2) #3370# Deactivate Enhanced Full Rate Codec (EFR) OR *3370# ( Favourite )
(3) *#4720# Activate Half Rate Codec - Your phone uses a lower quality sound but you should gain approx 30% more Talk Time.
(4) *#4720# Deactivate Half Rate Codec.
5) *#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type. ( Favourite )
(6) *#9999# Phones software version if *#0000# does not work.
(7) *#06# For checking the International Mobile Equipment Identity (IMEI Number). ( Favourite )
(8) #pw+1234567890+1# Provider Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).
(9) #pw+1234567890+2# Network Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).
(10) #pw+1234567890+3# Country Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).
(11) #pw+1234567890+4# SIM Card Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).
(12) *#147# (vodafone) this lets you know who called you last.
(13) *#1471# Last call (Only vodofone).
(14) *#21# Allows you to check the number that "All Calls" are diverted to
(15) *#2640# Displays security code in use.
(16) *#30# Lets you see the private number.
(17) *#43# Allows you to check the "Call Waiting" status of your phone.
(18) *#61# Allows you to check the number that "On No Reply" calls are diverted to.
(19) *#62# Allows you to check the number that "Divert If Unreachable (no service)" calls are diverted to.
(20) *#67# Allows you to check the number that "On Busy Calls" are diverted to.
(21) *#67705646# Removes operator logo on 3310 & 3330.
(22) *#73# Reset phone timers and game scores.
(23) *#746025625# Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop Allowed", it means you will get the best standby time possible.
24) *#7760# Manufactures code.
(25) *#7780# Restore factory settings.
26) *#8110# Software version for the nokia 8110.
(27) *#92702689# Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair
(0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again. (Favourite )
(28) *#94870345123456789# Deactivate the PWM-Mem.
(29) **21*number# Turn on "All Calls" diverting to the phone number entered.
(30) **61*number# Turn on "No Reply" diverting to the phone number entered.
(31) **67*number# Turn on "On Busy" diverting to the phone number entered.
(32) 12345 This is the default security code.


press and hold # Lets you switch between lines

IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #
Provider lock status: #pw+1234567890+1
Network lock status #pw+1234567890+2
Provider lock status: #pw+1234567890+3
SimCard lock status: #pw+1234567890+4

NOKIA 6110/6120/6130/6150/6190
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #

NOKIA 3110
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 # or * # 9 9 9 9 # or * # 3 1 1 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #

NOKIA 3330

*#06# This will show your warranty details *#92702689#
*3370# Basically increases the quality of calling sound, but decreases battery length.
#3370# Deactivates the above
*#0000# Shows your software version
*#746025625#This shows if your phone will allow sim clock stoppage
*4370# Half Rate Codec activation. It will automatically restart
#4370# Half Rate Codec deactivation. It will automatically restart
Restore Factory Settings To do this simply use this code

Affected Products or Services

Service Software Application

Introduction

New version of Nokia Care Suite is available. This multi-protocol service software supports Nokia CDMA products and limited functions of GSM and WCDMA products.

Bulletin Content

1. Introduction

New version 4.0 (2010.27.1) of Nokia Care Suite is available. This multi-protocol service software supports Nokia CDMA products and limited functions of GSM and WCDMA products.

Updating to this version is mandatory when servicing these devices: RM-567, RM-636, RM-677, RM-678, RH-121, RH-125, RH-126, RM-647, RM-653, RM-689

2. New feaures from previous version 3.1 (2010.20.3)

• Multi IMEI Reader makes it possible to read and print IMEI numbers from phone via USB cable, when phone is in power off state. Please note that you need to have at least one default printer configured on your PC when using Multi IMEI Reader.

• Support for simultaneous use of Product Support Tool and Testing & Tuning Tool. Testing & Tuning release will be made in the near future, it includes support for RF Autotuning, EM Calibrations, and other testing / troubleshooting related functions.

• ‘Reset all’ button in dialog preferences tab for restoring all confirmation dialogs added

• Re-fresh connection button in the Care Suite UI to init CU-4 added

• Changes to Offline/online state change. Now status can be changed in status bar instead of Preferences.

• Support for new products added: RM-627, RM-689, RM-632, RM-678, RM-677, RM-685, RM-687,

3. Changes & Error corrections from previous version

• Corrections to Type Label Printing

• Corrections to Product Code Change

• Phone-book & MDN options from Multi SW Updater removed

• Device detection improvements

• Improvements to Phone Recovery ( dead phone flashing)

4. Instructions for installation & use

User guide document and elearning material for Care Suite are downloadable from Nokia Online (NOL). Please check the availability of documentation from your local NOL (www.nokiaonline.com )

Care Suite can be installed and used simultaneously on same PC with Phoenix Service Software version 2010.12.8.42304 or newer, which uses FUSE connection manager.

Care Suite installation and use does not require that a dongle (PK-1, PKD-1 or FLS-5) is connected to PC. FLS-5 is only used for FBUS communication to phones which do not support direct USB connection

5. Known errors & limitations

• This release has not been tested on Windows Vista because the focus is now on Windows 7. So we can’t guarantee that it works on Vista.

• RM-567 is supported but drivers have to be installed separately and multi tools are not working reliably with RM-567. Compal drivers and one of the Foxconn driver package are also removed from the installation because they are not Windows 7 compatible.

• There is a problem with a Crash file server URL stored in Admin Preferences xml file – related to REQ 414-6325: Automatic extraction and upload of S40 X-Files and S60 SOS files to Nokia repository using Care Suite (Babel support) delivered in 3.0.1 release. When installed 3.0.2 version on top of existing 3.0.1 version, please go to the C:\Documents and Settings\All Users\Application Data\Nokia\Nokia Care Suite\ProductSupportToolForStore and remove the AdminPreferences .xml file and run Nokia Care Suite again. New correct preferences file will be created when application will be closed. It is mandatory to have phone’s crash files reports send correctly.

• Supported features depend on product generation and data package configuration. Only refurbishment / software update functions are guaranteed to work for older DCT-4 products. Other features may appear, but they are likely not to work. Some products, such as the RH-111 and RH-125 Care Suite is the only service software. Please check product specific documentation for details.

• Interoperability with Win Vista is not fully guaranteed. It is advised to use this release with Win XP or Win 7

• Products using Data Package 1.0 concept are not supported

• Product detection may be slow, please wait patiently. Always follow the UI of connected phone for instructions also, as some models for example need the user to set the phone to PC Suite mode before communication can continue.

• When using multi software update you may experience instability

- Update speed is reasonable if you do not exceed 4 phones

- It is recommended to use phones of the same type

- Product detection works better if you allow Care Suite to detect the first phone before you connect additional phones

• Note that Type label printing feature is not yet 100% ready and labels may not be correct. Currently type label printing supports only products that have Data package version 2 and XML configuration for type label.

• PST and NSL processes are not always closed. When you close Nokia Care Suite / PST, you may need to close down some processes manually before you are able to restart. Close all applications and Check from Task Manager that following processes have been closed:

- fuse.exe

- FuseService.exe

- nsl_host_process.exe

- ProductSupportForStore.exe

• Refurbish and multi refurbish are disabled from these products:

- Nokia N81 8GB (RM-179)

- Nokia N86 8MP (RM-484)

- Nokia N91

- Nokia N91 8GB

- Nokia N95 8GB (RM-320, mass memory delivery through NOL)

- Nokia N96 (RM-247)

- Nokia N97 (RM-505)

- Nokia N97 Mini (RM-555)

- Nokia N900 (RX-5)

- Nokia X6 (RM-559)

• Care Suite 3.1 is not working with CU-4 service adapter. If you have ever had CU-4 service adapter in Fuse then Care Suite is misusing the CU-4 connection and that causes PST freeze.

• Automated Application Update does not work

• When using Multi IMEI Reader, you must have at least 1 default printer configured ( may be PDF / print to file)

• There are some problems with specific preferences visibility and access to log files location (read/write) on no Admin Windows accounts. It’s recommended to use NCS on Admin account or User account with power privileges.

• Product detection problems may occur, if Software package path is set to a folder which uses diacritic signs

6. Products supported

This is a list of supported products without Online Internet connection to FiRe. If you use Care Suite in offline mode with local data package installed, please check from the list below. If you use Care Suite in online mode (connection to Fire), you will receive updates from FiRe and then this list is not exhaustive.

NOTE: Multitools are not working reliably and it is recommended to use only similar models simultaneously. These phones do not support Multitools: RM-389V, RM-455, Nokia 6260s (RM-368), Nokia 6750-1b (RM-381), RM-606, RM-589V, Nokia 6700c (RM-470)

NOTE: Drivers for Service Module 00004 and Service Module 00006 are not included in NCS package and should be installed separately. Service Module 00004 drivers do not support Windows 7.

Service Module 00001:

Nokia E90 (RA-6), Nokia 6630 (RM-1), Nokia E70 (RM-10), Nokia N92 (RM-100), Nokia 6136 (RM-106), Nokia N71 (RM-112), Nokia 6131 (RM-115), Nokia 6110 Navigator (RM-122), Nokia 6234 (RM-123), Nokia 6126 (RM-126), Nokia 6133b (RM-126), Nokia N75 (RM-128), Nokia N73 (RM-132), Nokia N73 (RM-133), Nokia N76 (RM-135), Nokia 7390 (RM-140), Nokia 6233 (RM-145), Nokia 5300 (RM-146), Nokia 5300 (RM-147), Nokia N76 (RM-149), Nokia N93 (RM-153), Nokia N93i (RM-156), Nokia N93i (RM-157), Nokia N91 (RM-158), Nokia N95 (RM-159), Nokia N95 (RM-160), Nokia 8600 Luna (RM-164), Nokia E50 (RM-170), Nokia E50 (RM-171), Nokia 5200 (RM-174), Nokia 6290 (RM-176), Nokia 6125 (RM-178), Nokia N81 (RM-179), Nokia N72 (RM-180), Nokia 5200 (RM-181), Nokia 6110 Navigator (RM-186), Nokia 6086 (RM-188), Nokia N77 (RM-194), Nokia N77 (RM-195), Nokia 6085 (RM-198), Nokia 6134 (RM-199), Nokia 6151 (RM-200), Nokia 6263 (RM-207), Nokia E65 (RM-208), Nokia 7373 (RM-209), Nokia 6267 (RM-210), Nokia 6300 (RM-217), Nokia 6300 (RM-222), Nokia N81 (RM-223), Nokia E61i (RM-227), Nokia 5700 (RM-230), Nokia 8800 (RM-233), Nokia N78 (RM-235), Nokia N78 (RM-236), Nokia 3110 Classic (RM-237), Nokia E70-2 (RM-24), Nokia 6500 slide (RM-240), Nokia 5610 XpressMusic? (RM-242), Nokia 6120c (RM-243), Nokia E51 (RM-244), Nokia N95 (RM-245), Nokia N96 (RM-247), Nokia 7500 Prism (RM-249), Nokia N81 (RM-256), Nokia 3555 (RM-257), Nokia 6086 (RM-260), Nokia 7900 Prism (RM-264), Nokia 6500c (RM-265), Nokia 6288 (RM-268), Nokia 6555 (RM-271), Nokia 3500c (RM-272), Nokia 3500 Classic (RM-273), Nokia 3109c (RM-274), Nokia 6555c (RM-276), Nokia 3555 (RM-277), Nokia 6500s (RM-278), Nokia 5610 (RM-279), Nokia N96 (RM-297), Nokia 5700 (RM-302), Nokia 5310 (RM-303), Nokia 5310 (RM-304), Nokia 6121 (RM-308), Nokia 6120c (RM-310), Nokia N82 (RM-313), Nokia N82 (RM-314), Nokia N95(RM-320), Nokia N95 (RM-321), Nokia 6301 (RM-322), Nokia 6301 (RM-323), Nokia 6600 (RM-325), Nokia 6220 (RM-328), Nokia N85 (RM-333), Nokia 6300i (RM-337), Nokia N78 (RM-342), Nokia E66 (RM-343), Nokia E66 (RM-345), Nokia E71 (RM-346), Nokia N79 (RM-348), Nokia N79 (RM-349), Nokia N79 (RM-350), Nokia 3600 (RM-352), Nokia 7610 (RM-354), Nokia E71 (RM-357), Nokia 5610 (RM-358), Nokia 5610 (RM-359), Nokia 6680 (RM-36), Nokia 3120 (RM-364), Nokia 3120 (RM-366), Nokia 6210 (RM-367), Nokia 7310 (RM-379), Nokia 3250 (RM-38), Nokia 6210 (RM-386), Nokia 6220 (RM-387), Nokia 6212 (RM-396), Nokia 6500c (RM-397), Nokia 6650d-1c (RM-400), Nokia E71 (RM-407), Nokia 6210 (RM-408), Nokia 5320 (RM-409), Nokia 5220 (RM-410), Nokia 5220 (RM-411), Nokia 6600 (RM-414), Nokia 5320 (RM-416), Nokia 5320 (RM-417), Nokia 6210 (RM-419), Nokia N90 (RM-42), Nokia E66 (RM-420), Nokia N95 (RM-421), Nokia 6124 (RM-422), Nokia 6122 (RM-425), Nokia E51-2 (RM-426), Nokia 3610 (RM-429), Nokia N91 (RM-43), Nokia 7210 (RM-436), Nokia 8800a (RM-451), Nokia N96 (RM-472), Nokia E60 (RM-49), Nokia N93 (RM-55), Nokia 6270 (RM-56), Nokia 6681 (RM-57), Nokia 6682 (RM-58), Nokia N71 (RM-67), Nokia 7370 (RM-70), Nokia 6288 (RM-78), Nokia 6280 (RM-78), Nokia RM-79 (RM-79), Nokia N70 (RM-84), Nokia 5500 (RM-86), Nokia E62 (RM-88), Nokia E61 (RM-89), Nokia N80 (RM-92), Nokia N70 (RM-99), Nokia 2610 (RH-86, RH-87), RM-246, Nokia 5800 (RM-356 RM-432), Nokia 5130C (RM-495), Nokia E-52 (RM-481), Nokia E-55 (RM-482, RM-497), RM-647, Nokia N97 mini (RM-553, RM-555), Nokia N97 (RM-505), Nokia 7510 (RM-399), Nokia 1680 (RM-490), Nokia 5730 (RM-465), Nokia 5130 (RM-496), Nokia 2720 (RM-520), Nokia 3711 (RM-511), Nokia 2330 (RM-513), Nokia 2600 (RM-341), Nokia 2660 (RM-293), Nokia 2680 (RM-393), Nokia 6350 (RM-455), Nokia 6750 (RM-381), Nokia 2720 (RM-520), Nokia 2320 (RM-515), Nokia E72 (RM-529, RM-530, RM-584), Nokia E52 (RM-469), Nokia 2730 (RM-578, RM-579), Nokia 2760 (RM-258, RM-259), Nokia N900 (RX-51), Nokia 6303 (RM-443), Nokia 3710 (RM-510), Nokia 3720 (RM-518), Nokia X3 (RM-540), Nokia 2690 (RM-635), Nokia 7230 (RM-598, RM-604), Nokia 6303i (RM-638), Nokia C5 (RM-645), Nokia 2710c (RM-586), Nokia 1661 (RH-122), Nokia 3555 (RM-270), RM-289, Nokia 6650 (RM-324), Nokia N85 (RM-334), Nokia N85 (RM-335), Nokia 6260 (RM-368), Nokia 7310 (RM-378), Nokia 1680 (RM-394, RM-395), Nokia 7510 (RM-398), Nokia E75 (RM-412, RM-413), Nokia 6720 (RM-424), Nokia 5800 (RM-427, RM-428), Nokia 5630 (RM-431), Nokia E63 (RM-437, RM-449, RM-450), Nokia 6208 (RM-458), Nokia 6700 (RM-470), Nokia N86 (RM-484, RM-485, RM-486), Nokia 6710 (RM-491), Nokia 6790 (RM-492), Nokia 5530 (RM-504), Nokia N97 (RM-506, RM-507), Nokia 3710 (RM-509), Nokia 2330 (RM-512), Nokia 2320 (RM-514), Nokia 2323 (RM-543), Nokia 6730 (RM-547), RM-551, Nokia X6 (RM-559), Nokia 2700 (RM-561), Nokia 6720 (RM-564), RM-568, Nokia 6600i (RM-570), Nokia 3208c (RM-572), Nokia 6760 (RM-573), Nokia 6700 (RM-576), Nokia 5230 (RM-588, RM-593, RM-594), RM-596, RM-597, Nokia 6790 (RM-599), Nokia E63, (RM-600), Nokia 5800i (RM-602), Nokia 5330 (RM-615), Nokia 5233 (RM-625), RM-626, Nokia 5230 (RM-629), RM-684, Nokia 6700 slide (RM-577), Nokia X2-00 (RM-618), Nokia C3-00 (RM-614), Nokia E73 (RM-658), Nokia X5-01 (RM-627, RM-648) RM-639, RM-640, Nokia E5-00 (RM-632), Nokia C6-00 (RM-612), Nokia C6-00.1 (RM-624)

NOTE: When performing refurbish to “Nokia 6110 Navigator (RM-186, RM-122)” user data might not be removed completely. The problem is in phone data package.

NOTE: Following products might require SIM card inserted while refurbishing: Nokia 6630 (RM-1), Nokia N72 (RM-180), Nokia E70 (RM-10), Nokia N70, Nokia 6680, Nokia 6681, Nokia N91, Nokia 6682 (RM-58), Nokia N70 (RM-84), Nokia E60 (RM-49), Nokia N73 (RM-132), Nokia N73 (RM-133), Nokia N93 (RM-153), Nokia N72 (RM-180), Nokia N93 (RM-55), Nokia N80 (RM-91), Nokia N80 (RM-92), Nokia N80 (RM-93), Nokia N70 (RM-99), Nokia N90 (RM-42), Nokia E70 (RM-10), Nokia E50 (RM-170), Nokia E50 (RM-171), Nokia E70-2 (RM-24), Nokia E61 (RM-89), Nokia N71 (RM-112), Nokia N71 (RM-67), Nokia N92 (RM-100), Nokia N92 (RM-101), Nokia N92 (RM-102), Nokia N92 (RM-103), Nokia 3250 (RM-38), Nokia N75 (RM-128), Nokia 5500 (RM-86), Nokia N93i (RM-156), Nokia N93i (RM-157), Nokia E65 (RM-208), Nokia E61i (RM-227)

Service Module 00003

Nokia 2605 (RM-339), Nokia 6205 (RM-347), Nokia 7205 (RM-383), Nokia 2608 (RM-376), Nokia 8208 (RM-384), Nokia 8208i (RM-384), Nokia 2705 (RM-464), Nokia 7705 (RM-526), Nokia 7208 (RM-383), Nokia 6206 (RM-347)

Service Module 00004

Nokia 1006 (RH-120), Nokia 1606 (RH-109), Nokia 2228 (RM-377), Nokia 3606 (RM-375), Nokia 6316s (RM-595), Nokia 6316 slide (RM-595)

Service Module 00005

Nokia 1508 (RM-388), Nokia 1508i (RM-430), Nokia 1506 (RH-128)

Service Module 00006

Nokia 6788 (RM-567), Nokia 6788i (RM-636), Nokia C5-01(RM-677), Nokia X5-00 (RM-678)

Service Module 00008

Nokia 1202 (RH-111), Nokia 1661 (RH-121), RH-125, RH-126, RM-647, RM-653, RM-689

Service Module 000010

Nokia 3806 (RM-583)

7. Reporting errors (manual reporting)

Care Suite has been activated to the Genius – tool so error reporting works the same way as for the Phoenix Service Software. Please include log files, detailed description on how to reproduce the problem and screenshot to the case

When reporting Nokia Care Suite errors, please attach application log files (if applicable). If error is reproduce able, please delete old existing log files from specified locations, start service software, reproduce the error and then attach the log files to Genius case.

If the default configuration hasn’t been changed via the preferences dialog, the log files for Nokia Care Suite are located at:

• C:\Documents and Settings\\Application Data\Nokia\Nokia Care Suite\Action Reports

• C:\Documents and Settings\All Users\Application Data\Nokia\Nokia Care Suite\Logs\Refurbish Logs
The log files for Nokia Service Layer are located at:

• C:\Documents and Settings\All Users\Application Data\Nokia\Nokia Service Layer\C\Logs

• C:\Program Files\Common Files\Nokia\Service Layer\C\Service Modules\Service Module_\Log

Please also add flash logs when reporting software update, refurbish or product code change related errors:

• C:\Documents and Settings\\Local Settings\temp

• adl_flash.log. This file is created when USB connection is used for flashing.

• ta_hwaprogrammer.log This log is generated with non-direct USB flashing, when flash prommers are used.

• fps8_ta.log This log is generated with non-direct USB flashing, when flash prommers are used for products which use older ta_flash_impl.dll.

• Please note that you may find all or some of the above mentioned log files from specified location depending on the tools and connection you use. For example adl_flash.log is not created if you use flash prommer, and ta_hwaprogrammer.log or fps8_ta.log are not created if you only use direct USB cable.

On Windows Vista instead of C:\Documents and Settings\ use C:\Users\ or C:\ProgramData\

8. ZIP Package generator for reporting errors

You can use the ZIP Package Generate tool to create a ZIP package with necessary files to report an error. Please do the following steps to generate the ZIP package file:

1. Launch Product Support Tool for Store

2. From main menu select Help -> Troubleshooting. The Zip Package Generator will be opened.

3. In hours define period from which log files will be gathered in the ZIP package.

4. Press Create button and wait a while. When ZIP package is generated the content is displayed:

5. Press show Zip Folder button to open Explorer window with folder containing the generated ZIP package:

6. Notice that the generated ZIP package is highlighted by default. The ZIP packages should be removed manually when they are not needed any more.

7. Attach the generated ZIP package to the Genius Case.

8. Brief step by step description about how the error can be reproduced should be attached to the Genius Case.

9. Please also attach screenshot of error to the Genius Case.

9. Notes

This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (OpenSSL: The Open Source toolkit for SSL/TLS).

Copyright (c) 1998-2005 The OpenSSL Project. All rights reserved.

Copyright (c) 1995-1998 Eric Young (eay@cryptsoft.com). All rights reserved.

OpenSSL license text can be found from OpenSSL: Source, License.

Download URL

NokiaCareSuiteForStore_4_0-2010_27_1.msi

Divx player is now available for your Symbian based mobiles . If you like to play the Divx videos ,now you dont need to convert them, just transfer to your mobile and play. I have tested the S60 5th edition  player on my Nokia N97. The video quality is mmm…ok ,but not that good. Still it is worth for play informative videos. Hope to get better version soon.

Download the free Divx multimedia player for you mobile here
Symbian OS 9 S60 3rd Edition
Symbian OS 9 S60 5th Edition