5130c RM 495, is a handphone nokia BB5 SL3 categories ...
and because it was so many people say the phones are not support for the process simlock unlock and repair ... and repairs ervice Contacts ....
Things true .........................???

Um .... before we parse the facts, there is an important question .... what SL3 or Security Level 3?
Should we understand from the beginning ..... SL1, SL2, SL3 ..........

A lot of information circulating on various forums and each one is slightly different,
but more or less following the division according to what I understand and believe:
SL1 (Security Level 1) = Nokia BB5 early generations who do not have areas of 120 PM
SL2 (Security Level 2) = Nokia BB5 that have PM120 areas and simlock area contains data that are connected with the value PM308
SL3 (Security Level 3) = Nokia BB5 that have areas of PM 120, PM308 and protected areas



Based on the distribution of the above, what can and what can not be performed on each of these types of mobile phone?
SL1
Flashing = can be done
Write PM 1 and PM = 309 can do (using the SX4, reset the NPC, Bypass CRT)
Write PM all of area = could do
Write RPL = Can be done
Unlock = can be done
SL2
Flashing = Can be done
Write PM 1 and PM309 = Can be done (using the SX4, reset the NPC, Bypass CRT)
Write PM all of area = Can be done
Write RPL = Can be done
Unlock = Can be done

SL3
Flashing = Can be done
Write PM PM309 = 1 and could be done (using the SX4, reset the NPC, Bypass CRT)
Write PM area 308 = Can not be done
Write RPL = Can be done
Unlock = not done

NB: the SX4 with the way the bypass Cert results are sometimes not perfect ... therefore recommend to use SX4 at Auth via the server.

Test security is related to the value of PM 1 and PM 309, if the value in both areas there is an invalid ... the results of selftest in the security test will be failed / failing. The result is "contact service".
Solution: re-write the area AM and PM 309 to the first valid value

Simlock test associated with the value of PM 120 and PM 308, if the value at the proficiency level in these two areas there that are not valid, then the results of selftest in Simlock test will be failed / failing. The result is "contact service".
Solution:
1. If the value of AM 120 with problems, if you have a valid backup, can be tried to write over these areas. If not, create your own PM 0 section 120 using a variety of free tools available, then try to re-write the area ...
2. If the PM 308 is problematic, it seems there is currently no tool that is able to fix it, because the PM 308 protected areas, can not re-write (some say could ... with a little trick)

I believe, that a small area of AM 308 could probably corrupt, because the area is protected ... so if you have a problem contact service for simlock test failed, then most likely due to a corrupt area of 120 PM, not AM 308 area.
Examples PM 120 log because of a corrupt ...

I think its possible....cause PM 308 cannot corrupt/modify......

Mobile SL3
Mobile Type SL3 are all types of HP BB5 SL2, whether using single or dual engine processor, using RAP3G or Rapido, if phone has PM120 area or / and have a protected area PM308 and also protection against firmware so that in general the various tools or software improvement on the market today can not do Rebuilt Simlock data and key data on handpone simlock this category.
Tipe2 Mobile Nokia SL3:
* RM-352 3600s? MCU SW 56.26
* 5310 RM-303? MCU SW 58.58, 59.42 MCU SW. Raps V3.01
* 6300 RM-217? MCU SW 57.20
* 6500C RM-265? MCU SW 59.45 RAP3GS V2.0
* RM-240 6500s? MCU SW 59.60 RAP3GS
* 5130c RM-495 ALL-PA RAPS_V3.03 version
According to information circulating among programmers and engineers that most tools or software on the market improvements have not been able to do against handphone2 UNLOCK process, because handphone2 PM308 has a protected area which can not be re-programmed (except for DM3? There may be a tool that others). Also Rebuild process Cert (ASK-RPL service) will not run perfectly or it can be said Not Supported? So if we have a case? Contact Service? simlock caused by a corrupt (in cell phones this type), do not rush to do ask2rpl service because there are no tools /software improvements that can improve all of the certificates are perfectly / properly 100% ..

Video Tutorials Contact'Service-5130c RM495 which often caused because security'failed